-
Farengeto
Council on Regional Security
-
-
|
Joined:
Mar 2014
Posts:
2,828
Threads:
229
|
Credits: 34,980¢
Republic of Farengeto
Department of Cartography
The South Pacific Bureau of Cartography Office
The Republic of Farengeto is pleased to announce the opening of the Farengeto Cartography Office.
Thread Index
News
The Republic of Farengeto Map Archive
Deparment of Statistics
Cartography College
Frequently Asked Questions
Requests
News
09/02/2014 - Grand Opening
Welcome to the thread everyone! With all the maps I've been making and some of map tutorials I have planned I decided to create my own thread for it. There's still work to do before it's fully functional, but I'll save that for when it's not after midnight.  So far I have a Farengeto map archive set up below. I've reserved space for any tutorials, hopefully I'll have the map design one up soon. I'll add in an FAQ and requests section and see if I can do anything with them. Don't get your hope up too much for the latter though. Enjoy!
12/02/2014 - Cartography College Open
The first two entries in our Cartography College, "Expanding Your Claim: Enlarging Your National Map" and "The Virtual Electorate: Mapping the Vote", have been completed and are available to public. The Farengeto Department of Cartography is always looking for your feedback. Whether it's questions or comments don't hesitate to contact us.
21/03/2014 - Upcoming Projects
The Farengeto Department of Cartography is pleased to unveil some of their current projects.
The South Pacific Vector Map
Thanks to file from the Bureau of Cartography, the Department is producing a vector version of the TSP map. Traditional bitmap images are pixel-based, while vector maps consists of lines, curves, and polyogns. What does this mean for you? The reliance on pixels means that the image will blur as the resolution increases. Vector maps on the other hand do not face this restriction, meaning they can be enlarged to any size with no blurring. Once finished and ready, the Department plans to distribute this publicly and hopes it may be used to greatly accelerate the creation of enlarged maps. However, the department would like to make it clear in advance that they will not be adding political features such as country names or cities.
Collaboration with Farengeto Electronic Corporation
The Department has begun working on a project with a regional leader in digital entertainment, Farengeto Electronics. Details of the project have not yet been released, however the department will be seeking international contributions for the finished project to make it a success.
The SVG will hopefully be available soon. Just some issues with layers to fix. And the fact I seem to crash it every 5 minutes. 
The Republic of Farengeto Map Archive
Topographical
Political
Electoral
2010 Elections:
[Image: JHv0Mid.png]
2013 Elections:
[Image: rzLDMsj.png]
Information to be added to the legend:
Political Parties:
Liberal Party - 132 seats - Center-left
Democratic Party - 48 seats - Left
Progressive Conservative Party - 29 seats - Right
Conservative Party - 11 seats - Far right
Cephio Party - 3 seats - Regional party for the Cephio Isles
Green Party - 2 seats - Environmental party
Other/Independent - 6 seats
Note: Each region does not possess the same amount of seats. Every 100,000 residents in the region represent 1 seat (rounded to near whole number), with a minimum of one seat per region. The Farengeto City region alone possesses 42 seat, the same as the entire Kylon province (Kylon, Caphias, Oppelatus and Raphion regions).
3D Topographical Map
Department of Statistics
Cartography College
Expanding your claim: Creating an enlarged national map
While you like your claim, it may lack the size and detail you desire. In this guide I will explain the basics of creating an enlarged map on your nation.
Required:- Computer (duh. )
- Image editor which supports layers
- B&N's TSP Map
Notes:- Don't be afraid to draw outside the lines a bit. It doesn't need to be exact down to the pixel.
- If you're using a laptop I actually recommend the trackpad here. I find it allows for more precision.
- While I used the freeware GIMP, anything with layers and your basic tools should work.
- I use a lot of layers for my image; the current full file of the Farengeto map has over 70. Keep in mind these unflattened images get much larger in size for each layer, and may also use more power while open.
- This guide presumes a basic knowledge of the functions of your editor. If you need clarification, let me know.
Step 1: Crop
First, you need to isolate your section of the map. There are many ways to do this, but the simplest way is to just do a rectangular select over your nation's area. Try to leave a bit of extra space around your borders. From there either crop it or put it in a new image.
Step 2: Resize
Now you need to scale up your image. Whatever you do, don't change the side length ratio, and try to keep the scale in even multiples. If your image was 450x250, then make it 900x500, 1350x750, etc. For our purposes I find the optimal dimensions to be 4x the original. By this size the file is typically already larger than your screen, and is starting to get blurry at 100%. The more you increase the size the blurrier it will get. After increasing my islands by 8x they were essentially a blur.
Step 3: Base Layer
Now that you have your original file ready, it's time to start enhancing. Your first step is to create a base terrain layer. Add a new layer amd select your lasso tool. Create a selection along the border of your nation. Zoom in a bit, and create your selection piece by piece for better accuracy. Fill this selection with your base colour. (I used the ones from B&N's map, use the colour picker tool to copy from the original image if you choose to use them.)
Step 4: (Optional) Oceans and Foreign Countries
Create a new layer and fill it with your water colour. Change the layer's level so it's below the base layer. Make it transparent for now.
Create another layer and add your base layer to the selection using the magic wand. Use the lasso tool to select all land on the image. Remove your base layer from the selection and fill the new layer. A medium gray works best.
Step 5: Elevation
Now you need to add elevations. Create a new layer and deselect if you haven't already. Repeat the lasso select process for the base layer for the next elevation. Don't worry about the edges on the border, go past the base layer and when you're finished use the Magic Wand and use the subtract or intercept settings to remove sections which do not overlap with the base layer. Fill the selection with the paint bucket. Repeat for all elevations.
Step 6: Rivers
Create a new layer and set your foreground colour to your water colour. Select the paintbrush tool. Draw your rivers in whatever size you please, I found 10px good for large rivers and 5px for small rivers (e.g. where they split). Select the base layer before drawing to keep your lines inside the area.
Step 7: Cities[/size]
Set your paint colour to black. Select a brush size, your largest or most important cities should be larger than others. I used 20px from the capital, 10px for provincial capitals and 5px for other major cities.
Step 8: Borders
Finally, take your base layer and use the selection tools to create a border around the image.
Congratulations! You've created your map!
It's election season and you'd like to show the world how your citizens voted. If you want to really pull it off it will take some extra thought.
Step 1: Political Divisions
First of all you need to create a map of your nation's political divisions. You can display each constituency, but you'd be dealing with at least a hundred, possibly two or three hundred, using typical representation. Alternatively, you could use a regional format where multiple ridings are displayed as a single group, which doesn't necessarily contain an equal number of ridings. This would be the equivalent of a state map for the US, however not all seats may go to the same party. It is particularly useful for dealing with cities, which often contain many small constituencies.
Drawing this is up to you. The simplest format would be to draw borders a couple pixels wide to create solid map sections. In the attached image I had created a seperate layer of just the regional box fill
Step 2: Political Parties
Next you need political parties to vote for. You don't need detailed platforms, just major party names and their basic ideology.
While the USA is very bipartisan, most nations around the world have several major parties. There's no right party types or size. A few common ones include:
- Liberal
- Conservative
- Socialist (Often use terms like "Democratic" or "Worker's" for party names)
- Green
- Regional parties (smaller, patriotic parties which generally push for further autonomy of their region. Common in regions with cultural differences or physical seperation)
- Other/Independent (there's absolutely no shame in using unnamed minor parties or independent members)
Step 3: Electoral Results
Note: You can skip this step, but this is to maintain consistency and an extra level of detail.
You need to calculate how many seats each party got and where they got them. I overthink these things a bit, as you can see in my detailed spreadsheet. (Upon request I can share a blank version.) These statistics can be useful for political roleplay.
Step 4: (Optional) Percentage Data
Next you need to calculate the percentage of vote for the leader in each region.
If you're using a riding display, the percentage can be anything above 100/number of parties. This is the theoretical minimum.
If you're using a regional format, calculate the % of seats won by the leading party. The percentage is up to you, but the typical range would be +/- half a seat.
Step 5: Colouring the nation
Now we're on to the design portion.
Select a colour for each party. It can be anything you'd like, though using many party types have a colour associated with them.
If you wanted a basic map, just fill in using the colours and you're done.
However, we'll be adding some more detail. If you look at real election maps you'll notice they often are shaded deeper based on vote percentages. To do this, first take the party colour and open your colour selection menu. From here, set your saturation (S) value to the vote percentage for that region. Fill the region fill the resulting colour
Repeat the colour process for each section of the map.
Now, step back and take a look. Your nation has voted and the results are in. The winner is...
Because paint is very simple it lacks many common features such as the ability to support layers. While you can use it, it's single layer nature overwrites anything you draw on top of and its drawing tools are insufficient for our purposes.
But as I mentioned, there are many free programs that work, my top 2 recommendations being GIMP and Paint.NET.
I'm awaiting your questions.
Additional Resources
All my map files and resources, including the unflattened originals, can be found in this folder.
All final map images can be found here.
All the original maps are by Brutland and Norden, licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 3.0 License and maybe shared and modified for non-commercial purposes with appropriate credit. [/disclaimer]
(This post was last modified: 03-06-2016, 01:26 AM by Farengeto.)
Reply
-
Jay Coop
Captain America impersonator
-
-
|
Joined:
Mar 2014
Posts:
5,142
Threads:
398
|
Credits: 16,620¢
This map, will it be created using Inkscape? And I want to be sure, country names and cities will be omitted?
4× Cabinet minister /// 1× OWL director /// CRS member /// SPSF
My History
-
Farengeto
Council on Regional Security
-
-
|
Joined:
Mar 2014
Posts:
2,828
Threads:
229
|
Credits: 34,980¢
Yes, I'm using inkscape for this. It will have the terrain and borders, but that's it. I need to fix the border layer primarily, but it's difficult because I have one too many nodes to preserve the map quality and it's obviously more than inkscape can handle,
-
Farengeto
Council on Regional Security
-
-
|
Joined:
Mar 2014
Posts:
2,828
Threads:
229
|
Credits: 34,980¢
The Farengeto Cartography Office is pleased to unveil a side-by-side preview of their vector map, displaying the region currently designated by the Federal Republic of Belschaft as the "Vannin Sea". The map is displayed at 2x the original resolution. Due to program crashing a 4x was not successfully created.
https://i.imgur.com/hjbTC3u.png
A full-sized map seems to crash the program on export. For an enlarged region or nation, please send a request the Office.
-
Jay Coop
Captain America impersonator
-
-
|
Joined:
Mar 2014
Posts:
5,142
Threads:
398
|
Credits: 16,620¢
One final question: will B&N be preserving the JPG version with all of the cities and countries, and continue with editing it? Or is this a question for him to answer?
4× Cabinet minister /// 1× OWL director /// CRS member /// SPSF
My History
-
Farengeto
Council on Regional Security
-
-
|
Joined:
Mar 2014
Posts:
2,828
Threads:
229
|
Credits: 34,980¢
(04-15-2014, 05:20 PM)JCRules Wrote: One final question: will B&N be preserving the JPG version with all of the cities and countries, and continue with editing it? Or is this a question for him to answer?
From what I've heard B&N will continue the original map as previously. I'm told he was going to repost the thread later this month.
(04-06-2014, 02:14 PM)Farengeto Wrote: For an enlarged region or nation, please send a request to the Office.
I would like to request an enlargened map of the Sanghelios Legion and it's colony.
-
Farengeto
Council on Regional Security
-
-
|
Joined:
Mar 2014
Posts:
2,828
Threads:
229
|
Credits: 34,980¢
The Farengeto Cartography Office has complete their survey and is pleased to present their results to The Sanghelios Legion
http://i.imgur.com/1BzRldd.png
http://i.imgur.com/iPIeLVe.png
The SVG was problematic but I made some progress which allowed a reasonably fast bitmap to be made. Unfortunately large-scale use overwhelmed my computer.
-
Qwert
[kvɛʈ]
-
-
|
Joined:
Apr 2014
Posts:
12,367
Threads:
139
|
Credits: 33,680¢
I would as well like to request an enlarged map of Sedunn and Vastraenn colony.
Roleplayer
Manager of the TSP and A1-0 maps
Roleplay moderator
![[Image: C5xhL3j.png]](https://i.imgur.com/C5xhL3j.png) Sedunn
- Population: 26,016,343
- GDP: $1.53 trillion
- Military: 354,000 personnel, 3.8% of GDP
- King: Vimmru II
- Foundation: Late Iron Age
- Member of the WF and CPSC
| ![[Image: xpCtQTW.png]](https://i.imgur.com/xpCtQTW.png) Transsuneria
- Population: 1,003,504
- GDP: $20.637 billion
- Military: 5,500 personnel, 0.75% of GDP
- President: Emil Palmann
- Foundation: 1905
- Member of the WF
|
-
Farengeto
Council on Regional Security
-
-
|
Joined:
Mar 2014
Posts:
2,828
Threads:
229
|
Credits: 34,980¢
The Farengeto Cartography Office has complete their survey and is pleased to present their results to Sedunn.
http://i.imgur.com/cA3mL36.png Sedunn
http://i.imgur.com/s3Dnoec.png Vastraenn
The FCO thanks Sedunn for their support and hopes they are pleased with the results.
|
![[+]](/images/collapse_collapsed.png "[+]")
News Archive
![[Image: snqZrFA.png]](https://i.imgur.com/snqZrFA.png)